Products

WISP Power Controllers

BENEFITS Proactive monitoring and control of Access Points and Repeater sites. Avoid technical support calls to reset locked up equipment. Up to six Ethernet attached wireless units may be monitored. Powered devices can be configured to be rebooted weekly at a specified time. Models available for either 110 to 240 VAC or 18 to 24 VDC operation. Remote reporting of system status based on defined events. Web based management. Software upgradeable
FEATURES Reporting Web management allows any of the automatically monitored parameters to be viewed using a web browser. The WxC can be configured to send email reports in the event of a parameter exceeding defined criteria. Power Management The two DC outputs can be switched either on or off remotely through the web management interface or through rules set up based on time of day or failure of a monitored parameter. Device Monitoring Up to six Ethernet attached devices may be monitored and actions to be taken based on the monitoring results. The two managed DC outputs allow the power control of Access Point wireless units to be separated from the power control of wireless units used for backbone links. Software Upgradable The WxC can be software upgraded to take advantage of new features. The upgrade can be done remotely without affecting operation of the attached powered or monitored devices.

MODELS

WAC24 This model which has a 110 to 240 VAC input with dual 24 VDC outputs is optimized for operation with wireless products providing monitoring, power management and reporting. Models:        WAC24 – 24V Accessories: 110v power cord – 3 ft                     DC output connectors – 2 Options:       DC power cord (18”) to connect to Tranzeo PoE unit

WDC24 This model has the same capabilities as the WAC24 model, but has a DC power input instead of the AC power input. This allows existing power supplies, from 18V to 24V DC, to be used while adding the reporting, management and monitoring features. Models:        WDC24 – 24V Accessories:  DC input connector – 1                    DC output connectors – 2 Options:       DC power cord (18”) to connect to Tranzeo PoE unit

For more information:

• Download the Data Sheet (253 KB PDF)

• Download the Application Note (858 KB PDF)

[ Home ] [ Internet Services ] [ Products ] [ Consulting ] [ Support ] [ Company ] [ Feedback ] [ Contact Us ]

[Privacy Notice] [Acceptable Use Policy] [Site Map]

Send mail to support@winters-broadband.com with questions or comments about this web site.
Copyright © 2002-2010 Winters Broadband LLC